Drain Cleaning – How to Get Rid of Clogged Drains

Drain Cleaning Tampa is essential to keep your drains and pipes functioning correctly. Clogged drains are breeding grounds for harmful bacteria, mildew, and mold.

Drain Cleaning

The most common method of drain cleaning involves using a chemical cleaner or homemade solutions. These include baking soda and vinegar, boiling water, a plunger, and a drain snake.

Drains are exposed to a lot of gunk, including hair and grease, so it’s not uncommon for them to get clogged. However, most clogs are easy to remove with some elbow grease and the right tools.

If you’ve tried the plunger but still can’t clear the blockage, try using a wet/dry vacuum. This tool creates suction to help break up clogs and is especially useful for kitchen sink clogs that are caused by grease. Just make sure that you have an extension cord and plug it into a power outlet.

Baking soda and vinegar is another simple home remedy that often works to unclog a drain. Add a cup of baking soda to the affected drain and let it sit for several hours (overnight is best). Then, pour in a cup of hot water. This solution works for most drains, including toilets.

Using a chemical drain cleaner can be hard on your pipes, so it should be used as a last resort. If you do need to use it, select a product that is labeled for the type of clog you have. Be careful not to get the chemicals in contact with finished surfaces, such as stoppers, faucets, and drain trim, as this can erode them over time.

To prevent clogs, run hot water after each use and clean your drains regularly with natural products. Regular cleaning will also keep grease, hair, and other debris from building up in the drain pipe. For even more protection, consider having your drainpipes professionally cleaned on a yearly basis. The professional can examine the condition of your drainpipes and help you take steps to prevent clogs in the future.


Using a pressurized blast of water, hydro jetting cleans the interior surfaces of pipes. It is a quick, effective way to break up and dissolve blockages like grease and soap scum that mechanical drain cleaners can’t reach. This method can also be used as a preventative measure to avoid clogs and drainage issues in the future.

This process involves feeding a specialized nozzle into your plumbing system, which is connected to a hose that can handle high psi forces and to a water tank that pumps the nozzle with pressurized water. The nozzle is designed with various spray patterns to tackle different types of debris in your pipes, from hard-to-reach areas to narrow spaces. The nozzle can even rotate to get in between cracks and crevices.

Before utilizing the nozzle, your plumber will first conduct a video inspection of your pipe and sewer line to assess the severity and location of the clog and check for damage. Once they have determined it is safe to proceed, the plumber will attach the nozzle and start blasting away at your pipes.

The high-powered water scours the walls of your pipes, dissolving any buildup and knocking out tree roots. It also helps to maintain the health of your pipes, as it prevents any clogs from forming on their insides and removes all traces of grime and residue.

Unlike more intensive plumbing techniques, such as breaking through walls or digging underground, hydro jetting does not require any harsh chemicals and is entirely harmless to your pipes and the environment. It is also ideal for older homes, which may have more fragile or unstable pipes. This option will help you avoid the high cost of plumbing issues in the future, including sluggish draining, recurring clogs and potentially catastrophic pipe or sewer line failure.


The plunger is one of the most common hand tools used to clear clogged drains. It is inexpensive and readily available at any hardware store, so it should be a staple in every home owner’s toolbox.

There are many types of plungers, but the simplest is a rubber suction cup attached to a handle. It works by creating a hydraulic seal with the drain opening, using water pressure to dislodge the clog and restore normal drain function.

To use a plunger, first make sure there’s enough water in the sink or tub to cover the drain hole and at least halfway up the rubber cup of the plunger. This will help create a stronger seal and increase the force of the plunger’s suction. Also, be sure to place a towel or rag over the overflow drain (if there is one) as this will prevent any splashes during plunging.

Once the plunger is in position, use a quick up and down motion to create a pumping action. This process can quickly dislodge most simple drain clogs. Be careful not to overdo it, however, as too much force can actually push the clog deeper into the pipes and cause a more serious blockage.

If plunging doesn’t work, try removing the pop-up stopper from the toilet or tub and cleaning out any hair or soap that has collected on it and the rod that moves the stopper up and down (a metal coat hanger bent into a hook can do the trick). If the clog is still not resolved, it might be time to use a pipe snake. These metal coil-like tools are better suited for clogs that have formed further down in the pipes, but they can be tricky to use and often require a professional.

Wire Hanger

A professional master plumber from Toronto will tell you that one of the most effective DIY methods to unclog a drain is to simply use your trusty wire coat hanger. If you don’t have a snake or other specialized tools, this simple technique will usually clear up most drains without any messy chemicals.

To get started, straighten out a wire coat hanger and bend the hook shape slightly to form a small handle or loop. If you can, remove the shower or sink drain cover to make it easier to fish out any debris. Push the wire coat hanger into the drain as far as you can, jiggling and turning it as you go. Once you feel that you’ve reached the clog, pull it out and dispose of it. Then, run a pan of hot water down the drain to rinse out the pipe.

While you’re at it, you might want to mix up a batch of baking soda and vinegar, a more natural drain cleaner that is also safer for your pipes than commercial chemicals. Pouring a 2-liter bottle of cola down your blocked drain will also often clear away hair, gunk, and other debris. The caustic acid in cola is more than enough to dissolve many clogs, but it’s also much milder than chemical drain cleaners. After pouring the cola down the drain, wait about an hour and then run hot water down the drain to rinse it clean. This is a simple and affordable way to keep your drains flowing as they should. It’s a lot better than calling in a plumber for a much more expensive and time-consuming job! Just be sure to wear rubber gloves if you’re handling any chemicals.

Baking Soda and Vinegar

One of the most time-tested and eco-friendly drain cleaners out there is a combination of two common pantry staples: baking soda and vinegar. This simple DIY solution can refresh a stinky drain and dislodge minor blockages.

This is because both baking soda and vinegar are caustic and acidic, meaning that when they come into contact with each other, they create a chemical reaction that can break down grime. In addition, the fizzing action of the mixture can dislodge clogs and flush out the pipes.

To use this natural drain cleaner, sprinkle half a cup of baking soda down the drain. Then pour a cup of vinegar. Then, wait for the mixture to bubble. After a few minutes, pour in another cup of hot water. Repeat this process as needed until the drain is completely clear.

If you don’t have vinegar handy, lemon juice can also be used as an acidic ingredient to clean a clogged drain. In addition, cream of tartar — an alternate to baking soda — can be used to create a powerful cleaning mixture.

This homemade drain cleaner is a great alternative to commercial store-bought products that are full of chemicals and can damage your pipes. In fact, you can even use this method on a regular basis to prevent clogs from developing. To keep your drains and garbage disposals smelling fresh and free from debris, use this DIY solution once a week to maintain your sink. Just be sure to cover your drain with a mesh sink strainer to catch any unwanted food scraps or hair that may fall down the drain during this process. You should also make it a point to empty the trap before using your sink after this treatment.